Parameter | Unit | Standards EN 622-1, EN 622-5, Tab.3 | Testing standard | |||||
---|---|---|---|---|---|---|---|---|
Thickness | mm | >4 do 6 | >6 do 9 | >9 do 12 | >12 do 19 | >19 do 30 | >30 do 38 | |
Density | kg/m3 | 780 | 770 | 760 | 750 | 730 | 710 | EN 323 |
Bending strenght | N/mm2 | 23 | 23 | 22 | 20 | 18 | 17 | EN 310 |
Integral bond | N/mm2 | 0,65 | 0,65 | 0,60 | 0,55 | 0,55 | 0,50 | EN 319 |
Moduls of elasticity | N/mm2 | 2700 | 2700 | 2500 | 2200 | 2100 | 1900 | EN 310 |
Swelling after 24h* | % | 30 | 17 | 15 | 12 | 10 | 8 | EN 317 |
Tearing off | N/mm2 | >1 | EN 311 | |||||
Hygiene class | % | <0,1 | Sample combustion and HCI etching method | |||||
Moisture content | % | od 4 do 11 | EN 322 | |||||
Thickness tolerance | mm | +/- 0,20 | +/- 0,30 | EN 324-1 | ||||
Length and width tolerance | mm | +/- 2 mm/m (max +/- 5mm) | EN 324-1 | |||||
Squareness tolerance | mm/m | 2 | EN 324-2 | |||||
Edge straightness tolerance | mm/m | 1,5 | EN 324-2 | |||||
The above physical and mechanical parameters relate also to Krono Stop Fire MDF fire-retardant boards. |
Size (length x width) mm | Thickness mm | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
2800 x 2070 | 6 | 8 | 10 | 12 | 16 | 18 | 19 | 22 | 25 | 28 | 35 | 38 |
Parametr |
Unit |
General requirements EN 622-1 Physical and mechanical requirements. EN 622-5 Tab. 3 |
Testing standard |
||
---|---|---|---|---|---|
Thickness | mm | ≥ 16,0 do 19,0 | ≥ 19,0 do 25,0 | ||
Density* | kg/m3 | 800 | EN 323 | ||
Bending strength | N/mm2 | 20 | 18 | EN 310 | |
Integral bond | N/mm2 | 0,55 | EN 319 | ||
Modulus of elasticity - major axis | N/mm2 | 2200 | 2100 | EN 310 | |
Swelling after 24h** | % | ≤ 5 | EN 317 | ||
Tearing off | N/mm2 | >1 | EN 311 | ||
Free formaldehyde content | mg / 100 g s.m. | ≤ 8,0 (Hygiene class E1) | EN 12460-5 | ||
Mineral particle content | % | <0,1 | Sample combustion and HCI etching method | ||
Moisture content | % | od 4 do 11 | EN 322 | ||
Thickness torerance | mm | +/- 0,30 | EN 324-1 | ||
Lenght and width tolerance | mm | +/- 2 mm/m (max. +/- 5 mm) | EN 324-1 | ||
Squareness tolerance | mm/m | 2 | EN 324-2 | ||
Edge straightness tolerance | mm/m | 1,5 | EN 324-2 | ||
* Tolerance: +/- 5% ** Parameter complies with the requirements of the standard EN 622-5, Tab.4 (MDF.H) MDF MR FRONT can be coloured green. |