Worktops

Worktops

Worktops are manufactured on the basis of chipboards using postforming technology. They have wide range of the decors’ surfaces and can be installed and kept clean easily. Worktops of LLC “SWISS KRONO” are characterized by durability and resistance to the influence of various outside factors.

Properties:

Resistance to high temperatures – allows putting hot cookware directly on the worktop, except from: kettle, metallic pot and frying pan with single-layer or multi-layer bottom that require using insulating pads;

Resistance to ultraviolet radiation – worktops do not lose color under the action of sun radiation;

Resistance to water steam – the steam does not penetrate inside the worktop and does not lead to board stratification. This is true for the working surface of the worktop. If any appliances are installed under the worktop, its bottom surface should be reliably protected from water steam;

Resistance to the influence of chemical substances – domestic detergents do not damage the worktop surface;

Resistance to the influence of milk, tea, coffee, juices, red wine, vinegar, ink – liquids do not penetrate into the worktop surface and do not create indelible stains;

Resistance to scratches, blows, abrasion – laminated materials (CPL and HPL) used for production of worktops are manufactured in compliance with EN 438 standards. It is allowed to carry out various household tasks on them, however it is forbidden to cut, polish, as well as strike them with sharp or blunt objects.

All these specifications apply to the working surface of worktops.