Contact us if you need information



810 Technology Drive
Barnwell, SC 29812

Contact Person


Gilles Drouin


Carlton Poole

Customer Service

Michelle Pritchard


Human Resources USA

SWISS KRONO Contact form

How to Measure for Laminate Flooring in 3 Steps

Determining how much laminate flooring you need to buy is relatively simple, but it pays to measure properly. Just follow these basic steps.


Step 1: Figure out the square footage of each room in which you want to install laminate-wood floors. To do so, use a tape measure to determine the room’s length and width. Then multiply the length by the width to get your square footage. For instance, if the room is 12 feet wide and 12 feet long, you will need enough flooring for 144 square feet (12×12=144).


Step 2: Add 10% to the square footage to accommodate cuts and waste. (If you’re choosing a tile pattern, add 20%). This is important because the cuts in the flooring need to be staggered. And you’ll want pieces left over just in case you need to mend or replace a board. So that’s 144 feet plus 10%, or 14 feet, for 158 square feet.

Step 3: Check with a retailer to get your order just right. Your measurements will certainly give you a good ballpark estimate when you multiply your square-foot needs by the retailer’s price per square foot, though little things can make a difference in the actual calculation. For instance, for installation in rooms larger than 40 feet long or 25 feet wide, a transition piece will be required.

A professional will help make sure you have all the accessories you’ll need, from transition strips to underlayment to floor molding.Want to learn more about installing laminate flooring? Visit the Swiss Krono USA FAQ section for more answers about measuring, prepping and installing laminate wood floors.