Contact us if you need information

Location

SWISS KRONO UA

Kamianka-Buska Central office
LLC “SWISS KRONO”
Ukraine, 80400
Lviv Region, Kamianka-Buska
Ya.Mudroho St., 62

Contact Person

SWISS KRONO Contact form

Ground Chipboards

A chipboard is a three-layer board with polished surface produced as a result of wood particles pressing in condition of high temperature and pressure with the use of formaldehyde resins as an adhesive.

The internal layer is made of large-fraction particles, while external layers are made of small-fraction particles – microparticles. As a result, the board surface is even and has a high resistance to tearing off of the top layer.

 

Application

Ground chipboards are the main material for furniture production. Apart from that, they can be used as a material for:

  • insulation inside the premises
  • partition
  • production of worktops, window-sills, wall panels, flooring

Due to the surface quality, chipboards can be finished by means of lamination (covering with thin melamine film), as well as varnished or glued with artificial and wood veneer.


Technical Specifications

Chipboards produced by LLC “SWISS KRONO” comply with the requirements of Technical Conditions of Ukraine 20.2-31147999-001:2002 “Chipboards”. The properties of LLC «SWISS KRONO» chipboards satisfy Ukrainian standards DSTU EN 312-1: 2003 “Particleboards. Specifications. Particleboards. Specifications. General requirements for all board types” and DSTU EN 312-3: 2003 “Particleboards. Specifications. Requirements for boards for interior fitments (including furniture) for use in dry conditions” as well as European standards.

Chipboards (polished) type P2 are made according to DSTU EN 312

Number Parameters Unit Requirements
1 Thickness mm >6 till 13 >13 till 20 >20 till 25 >25 till 32 >32 till 40
2 Bending strength Н/mm2 >11 >11 >10,5 >9,5 >8,5
3 Integral bond Н/mm2 >0,4 >0,35 >0,3 >0,25 >0,2
4 Tearing off Н/mm2 <0,8
5 Free formaldehyde content   Е 1 (<8mg/100g of dry plate)
6 Moisture content % From 5 till 13
7 Mineral particle content % < 0,2
8 Thickness tolerance mm ±0,3
9 Length and width tolerance mm ±5
10 Edge straightness tolerance mm/m >1,5
11 Squareness tolerance mm/m >2
12 Deviation from the average density  % ±10

Logistic information

Thickness, mm Format
2800 x 2070 mm 3050 x 1215 mm 4100 x 1215 mm
Number of boards per pallet/ gross weight, kg* Number of pallets per truck Number of boards per pallet/ gross weight, kg* Number of pallets per truck Number of boards per pallet/ gross weight, kg* Number of pallets per truck
10 56/2269 10 - - - -
12 48/2279 10 - - - -
15 50/2856 8        
16 42/2543 9 - - - -
64/3848 6        
18 38/2549 9 - - - -
58/3863 6        
22 42/3357 7 - - - -
25 32/2927 8 - - - -
28 28/2883 8 - - - -
38 - - 23/2060 11 23/2725 8

*weight deviation ±5%